Peavey SP-4Ti empty speaker cabinet - $50 (Grand Island)

Hello, I have for sale a single (I do not have two of these) Peavey SP-4Ti empty speaker cabinet (no drivers, but includes crossover, 1/4” phone jack input plate, & handles) from a fixed install (was not transported multiple times to gigs) in very good condition with no water damage.
These were made in the early to mid 90s.
This 2.
5-way (or quasi-3-way) trapezoidal shaped PA speaker originally came with two Peavey Black Widow 1505-KADT 15” woofers and a Peavey CH-2 90 degree x 45 degree radial horn driven by a Peavey 22XT+ compression driver.
The braced cabinet is constructed of seven ply 3/4” high density plywood.
The external dimensions are 26” wide (at the front) x 53” high x 20” deep.
The internal volume is approximately 7.
2 cubic feet not including mounted driver volume displacement.
The front firing bass reflex port is 22 3/4” wide x 3” high and has a port duct length/depth of 4”.
The port area is 68.
25 square inches.
The woofer cutout opening is 14”.
The rectangular horn cutout opening is 17 1/4” wide x 8 1/8” high.
The cabinet has not been abused and is in very good condition.
As always, the carpet could do with a modest cleaning, but is very decent as is.
If you don’t like rat fur carpeting you could always remove it and paint the cabinet with Duratex or Exohyde paint.
This cabinet could be used with other drivers and would save someone a lot of time and expense constructing their own cabinet.
Considering wood prices these days, and the value of your labor, that’s not a bad idea! Alternatively, you might have an SP-4Ti that with a cabinet in very poor condition, this nice condition cabinet replacement would address that concern.
For the right price, I could reinstall the original very good condition drivers and horn.
The PDF spec sheet is here: https://www.
manualslib.
com/manual/121383/Peavey-Sp-4ti.
html Thanks…